June 28, 2014 Framing a Large Copper Painting! Dogs Enjoy Summer!

Zoom! Zoom! Zoom! They can run very fast!

Daisy is feeling better today. Her intestines were not good for a few days. She
enjoy Craig's Pond and Lake Alamoosook today!

Here is Poppy and Monet taking a nap today!


I am very happy! I framed two large paintings! Here is a 24x24 oil on copper. I started
with 16 ounce copper and wrapped it around a 1/4 inch MDF board. I allowed the painting
to dry, sealed it with a very thin coat of gamblin' s galkyd, allowed this to dry, then set
the painting into the frame.

I had a 1/4 inch foam board cut to cover the back of the painting. I just think it looks
nicer. It has nothing to do with the copper painting. Canvas and linen paintings need
to breath as mold and mildew can develop on the back of paintings especially in tropical
climates. I found super duty framing hardware at Home Depot for paintings up to 100 pounds.
I have included painting hangers for up to 100 pounds also for my client.

Here is the 18x24 oil on copper framed. The blue things on the corners just help to protect
the frame.

This painting was done on 48 ounce copper. The copper panel was so thick
it did not need backing to keep it from warping. It was a lot easier to frame
as it was not as thick as the 16 ounce wrapped around the 1/4 MDF board.
Here are my thoughts about 48 ounce copper substrates: It costs the same
amount to paint on 48 ounce copper as it does painting on 16 ounce copper
wrapped around 1/4 inch MDF board. Framing the 48 ounce copper was much
easier. I will paint on 48 ounce copper for larger works over 10x10.
It was a major job framing these two large paintings! I am glad it is done.
I am proud of them. Now I will find a way to ship them! I will try the post office
first. They really don't weigh that much. Have a nice night!
Comments
Leave a Comment