Artist Renee Lammers


May 3, 2013 Red Poppy Paintings Sold! Excited About New Process Cradling Copper For Larger Works!

"Poppy Field" 12x18 oil on copper  Sold!

"Spring Poppies" 12x18 oil on copper.  Sold!  Thank you!

    While I was dreaming about painting on copper I was selling copper

paintings off my website last night!  I woke up and discovered my paypal

account was working overtime in the middle of the night!  I am very thankful

for midnight shoppers!  Big thank you.  Daisy and Duke celebrated today!

   After a few hours spent swimming at Lake Alamoosook, Daisy and Duke enjoyed

a Frosty Paw ice cream treat in honor of painting sales!  Tomorrow they will have

another Frosty Paw treat.  They were soooo happy about this.  Duke howled a little!

   Selling paintings is really exciting.  I rank selling paintings up there with my wedding day!

Seriously, it never gets old!  I am incredibly thankful for a supportive audience.  All this

excitement motivated me to discover a better way to prepare a larger copper panel.  After

a 10x10 there is need to provide a backing for the 16 ounce copper panel.  I have tried

recently to use brass screws to secure the copper to a cradled ampersand board.  I really

didn't like the screws sticking out above the copper where the oil paint would be.  No matter

how many layers of Gamblin's oil primer I used, the screws were still very visible.  I will

still be able to use this 200$ worth of copper cradled with screws to the board (36x48), but

I will need to have a frame with a depth of 1 inch made to cover the screws.  

   Above are the steps I used to create a supported 24x24 copper panel.  This is how I will do

all my larger copper panels.  I achieve this by myself in a half an hour of hard labor!  

1.  Purchased a 24x24 MDF board (1/4 inch)  at hardware store.  They cut it for me. 

2.  Cut the 16 ounce copper 25x25 with tin snips.  One inch difference was plenty of room to cradle the MFD.

3.  Placed a thick plastic sheet over the MDF board.  (It was cut from a thick shopping bag)

4.  Placed the copper panel over the plastic covered MDF board.  Plastic keeps the wood and copper 

separate so there is no interaction.

5.  Bend down one side of the copper over the MDF board.  

6.  Used a hammer to bend down the copper.  Very loud hammering!

7.  After one side was bent down completely, I started to bend down the opposite side over the MDF board.

8.  Next I used a tool to crimp the copper corner.

9.  I bend the copper corner inward.

10.  I used the hammer to further bend all the copper around the panel.  I never used the hammer on the front of the

panel.  I didn't want any hammer marks on the area I would paint.  I didn't need to use any screws.  The copper stayed

in place!  

11.  I put on protective glasses and facemask.  I sanded down the copper in circular motions with my orbital sander.

12.  I used a wet paper towel to wipe excess copper dust from the panel.  The copper panel is ready to paint on!

Daisy and Duke were wildly excited about this!  I hope to paint a large floral on my

new copper panel!  Exciting!  Finally figured out a way to cradle larger copper!  Let's paint!


Comments

8 Responses to May 3, 2013 Red Poppy Paintings Sold! Excited About New Process Cradling Copper For Larger Works!

Good for you! I can imagine your excitement. This is a major discovery.

Thank you so much for commenting Sheila! You are great. I am so happy for trying this. It takes a lot of courage sometimes to do different things. Thanks again. Renee

Thanks! You are so good to put these photos on your site. Now I realize we have copper that is too thick. Geee! Nevertheless, Bob cut the long sheet into three 11 x 14s and some time this weekend I'm going to try it out. I don't have the twice-boiled linseed oil to use as base yet. But I have brushes and oil paint. I can't wait! I am going to lightly sand the copper and start painting.

I hope to be helpful. I am not very excited about the boiled linseed oil on the sanded copper. It took two weeks to dry. I couldn't draw on top of the linseed oil. When I did it took off some of the linseed oil. I ended up trying to sand it off. About half of the linseed oil came off but the rest stayed. So I don't think I will do that again. I prefer to paint on sanded copper. I am excited for you to paint on copper.

OK. Thanks! NO twice-boiled linseed oil for me either. Yay!

There is already linseed oil in the oil paint! I also seal the painting with a polymerized linseed oil. I don't think it is necessary!

HI RENEE... KNOW YOU FROM PAINTING IN COLLEGE PARK ON TUESDAYS, AND I AM A FRIEND OF YOUR MOTHER...A SWEET LADY... I FOUND THE INFO ON COPPER VERY INTERESTING READING... AND LOVE YOUR POPPEY PAINTING...KEEP YOUR BRUSHES GOING...YOU DO SO WELL..I AM WORKNG ON MY WEB SITE NOW... LOVE AND HUGS.. NANCY

Hi Nancy! Nice to hear from you. I hope you consider Fineartstudioonline for a website. See you soon! Hugs back! Renee


Leave a Comment

Remember Your Info
Check this box if you want email updates when people comment on this post


Topics

Archives