April 12, 2013 Moonlight Painting. Preparation of a Large Copper Painting!

"Moonlight Sail" 4x4 oil on copper. Sold. Thanks.
I had ordered four 36x48 inch cradled wood panels from an online art company. Unfortunately
the package arrived yesterday very damaged. I could see one of the wood panel's corners all the way
throught two separate holes in the cardboard boxes. I asked UPS to pick them back up. They asked
me if the panels were repairable? They asked me to carry them inside for safe keeping. I may have
pulled a muscle or gave myself a hernia. I am feeling the same pain in my stomach as a few years
ago when I had to be hospitalized. They couldn't find anything then so I am not eager to go to the doctors.
I felt defeated the wooden panels arrived in such a damaged state. My stomach hurt.

Late last night I decided to go downstairs and cut open the cardboard boxes
to survey all of the wooden panels. Two of them were in perfect condition. So
I decided to keep those two. UPS took away the other two and the art supply place
will refund me for two damaged panels. Painting big is expensive...but exciting!

I kept the plastic on the wooden panel. Wood is acidic and will eventually
react with the copper. I don't know what exactly the wood will do to the copper
but it is to be avoided. I had a few choices to avoid interactions. I could put
plastic on the wooden panel. I could seal the wood with oil primer, oils, waxes, and
a few other things. This would take a lot of time to dry. So I opted to leave the plastic
on the wood!
Next I used two way tape to secure the copper to the wood panel. Robert had
to help me. I was very impressed with how this two way framing tape held the copper
in place. We did this just to secure the copper while Robert drilled
holes into the copper down into the wood panel. The tape held the copper perfectly. He
used very long wood screws to secure the copper to the wood panel. I will then
ues JBweld to cover the screws. Sand the JBWeld. Sand the copper panel. Seal
the copper panel with two layers of boil linseed oil. Then I should be ready to
paint! The frame will have a 1/2 inch rabbet covering the screws which are hidden by
the JBweld. The copper mounted to the cradled wood panel does not weigh over 15 pounds.

Daisy and Duke decided to watch us work.

Preparing this large copper painting properly has been very exciting today!

It snowed a little tonight! This is my backyard! One of our beehives survived the winter!
We have several new bee packages coming soon! Have a good night! Lots of exclaimation
points.
Comments
8 Responses to April 12, 2013 Moonlight Painting. Preparation of a Large Copper Painting!
Leave a Comment