Artist Renee Lammers


March 28, 2013 Inspiring Painters To Try Copper as a Substrate.

    This is a painting done by Mikel Wintermantel.  I thought I would share with you

some of his copper paintings.  I am very impressed with Mikel's work on copper.  Recently

I formed a Facebook group called Copper Paintings.  I invited all the copper painters

I knew to join the group.  I didn't know how many there might be.  Many people wanted

to join the group so they could just see the copper paintings.  Soon people were asking members

of the group how they too could paint on copper.  Websites were shared to allow

others to find copper and learn the process.  It is been very exciting for me to see many

wonderful copper painters sharing their copper paintings.  After sharing a few of their best

copper paintings,  questions were being asked about their techniques.  They were sharing how

they discovered copper as well as how they did this or that.  I asked Mikel Wintermantel

if I could share his story and his work on copper.  

Here is Mikel Wintermantel's first painting on copper.  Alkyd and Oil on copper 4x6 done in 2010.

This is what he wrote today on Facebook.  Mikel is recovering from throat cancer.  He

is in delicate condition after finishing all his chemo and radiation. I pray daily for his full recovery. 

Mikel Wintermantel wrote:

       I became interested in copper after seeing Renee's paintings at the Wekiva Paintout in 2009 when I first met her. She encouraged me to try it. I was so busy with my own indirect painting technique, teaching it and working with the paint companies that sponsored me (which mattered because you can't use that paint on copper)  that I put off even trying copper for several months. Her paintings were so charming that I kept thinking of copper. There was one work Renee's in particular, a painting of her dogs that I really liked. We were going to barter a trade. I realize now how much her dogs mean to Renee and her husband and that painting was going to stay with them. What I would recall with her paintings, months later, was the glint of the copper where she drew into the wet paint with the end of her brush.

     I am an indirect painter, I paint in layers... usually dry, 'safe' layers. That is what I teach in my workshops, layered luminist landscape paintings (until I got sick... hopefully I will resume soon). So I was reluctant to try a substrate where I could only use slow drying oils. When I finally did sit down with some copper I was blown away. The slippery surface forced me to use my skills right from the start. It was like skating on thin ice compared to my pumice and gesso surface, but it was exhilarating! Every stroke showed massive amounts of expression. I could use hog bristles and really amplify the effect, I could wipe back, scrape into it with knives... etc. But what really surprised me was how quickly the alkyd dried on the metal surface. One would think that without a porous surface the oil would just sit there and take at least as long as a gesso panel to dry. So now I even use copper in the field plein air. I can work a completed layer and within and hour is dry enough to work again. In a good session I can get 3, 4 or 5 indirect layers done in a copper panel outdoors. This allows me to have the warm glow of the copper react with luminous skies and light. At the same time I can pile on the paint in some areas with all that expression easily applied with the touch of a brush.

     The copper paintings are so unique looking that they sell right off the walls at a pretty good clip. They don't last long. I have been painting smaller for a few years now. Mostly due to the economy and mostly because many of my collectors in NY don't have a whole lot of wall space left. I am anxious to try some larger copper pieces. Maybe some of us can share how we mount larger works.

    I use fast setting epoxy (Update:  About the epoxy:  Mikel may decide to use another method to secure to mdf or masonite)  and glue an 1/8" to 1/4" thick piece is mdf or masonite to the back of the copper. It is about 1/2" smaller width and length so that when I glue that to a black backer and put it in a floater frame it makes a nice presentation with that slight shadow / pedestal effect. I paint edge to edge but I always sand a little bevel on the edges of most of my copper paintings to reveal that metal glint.

    Here is another great painting on copper by Mikel Wintermantel.  I believe Mikel and all of

the other copper painters will benefit by this copper painting group.  These are painters who have

been working independently inventing ways to work with copper as a substrate.  Now there

are different methods being shared.  It took a few days but then questions started to be asked.

There are many painters starting to share.  It is quite exciting!  If you are interested in joining the 

copper painting group on Facebook just click join on the page.  I will try to share some of these

techniques under "Why Copper?" heading on my website as I learn them.  

   I hope you enjoyed Mikel's work.  Have a great night!  


Comments

2 Responses to March 28, 2013 Inspiring Painters To Try Copper as a Substrate.

Beautiful work, Mikel!
Wishing you a speedy recovery.

Ok, that does it.... I am trying copper!


Leave a Comment

Remember Your Info
Check this box if you want email updates when people comment on this post


Topics

Archives